Toro 7500-D Series 96" 37HP 1642cc Diesel RD (74096)


7500-D Series 96" 37HP 1642cc Diesel RD (74096)



Looking for a workhorse mower that's easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. The highly productive 96-inch deck design folds up neatly for easy transport, then folds down to handle your biggest jobs — in half the time of comparable mowers. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.

  • Powerful 37 HP Yanmar® Diesel 1642cc Engine
  • 96" (243.8cm) Rear Discharge TURBO FORCE® deck
  • Mow smarter with Horizon™ Technology that lets you choose the right operating mode for the conditions, saving fuel costs while maintaining top-level performance
  • Deluxe suspension seat with iso-mounts to reduce operator fatigue and vibration
  • Superior Performance: Powered by a Tier 4-compliant, three-cylinder, 1.6 liter, 37 hp Yanmar diesel engine, this mower is packed with power to tackle the toughest mowing jobs.
  • The New Standard In Comfort: The floor pan and deluxe suspension seat are iso-mounted to reduce vibration. That results in a better operator experience and more productivity.
  • Extended Service Intervals: Save on maintenance with extended service intervals and a deck design that uses up to four matching blades. The mower is also backed by a 5-year, 2,000-hour warranty (first two years no-hour-limit).
  • Contour-Following Wing Decks: Wing decks on the 96" model flex up 20 degrees and down 15 degrees to follow the terrain, hugging the ground for the smoothest possible cut. Folds to 75" to fit in trailer.
  • Mow Smarter: All 7500-D models are equipped with Horizon™ Technology that lets you choose the right operating mode for the conditions, saving fuel costs while maintaining top-level performance.
  • Engine: 37 hp* Yanmar® Diesel 1642cc
  • Fuel Capacity: Diesel/12.5 Gal (45.4 L)
  • Cutting Width: 96" (243.8 cm) (Rear Discharge)
  • Air Filter: Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor
  • Anti-Scalp Wheels: 13 Standard
  • Armrests: Standard
  • Blade Tip Speed: 18,100+ ft/min
  • Blade Type: 4 blades at 24.5" length
  • Caster Tires: 15" x 6" - 6" (38.1 x 15.2 x 15.2 cm) Flat-Free Semi-Pneumatic
  • Clutch: Wet Disc
  • Deck Design: 7-Gauge TURBO FORCE® w/ Bull-Nose Bumper
  • Drive System: 17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
  • Drive Tires: 26" x 12" - 12" (66.0 x 30.5 x 30.5 cm)
  • Engine Horsepower: 37 HP
  • Engine Displacement: 1642cc
  • Foot Operated Height of Cut: Standard
  • Ground Speed: 12.5 mph (20.1 km/h)
  • Height: ROPS Height (Folded) 51" (129.5 cm), ROPS Height (Upright) 71.8" (182.4 cm)
  • Height of Cut: 1.0" - 5.5" (2.5 - 14.0 cm)
  • Hour Meter: Horizon™ Technology
  • Length: 97.38" (247.3 cm)
  • ROPS: Standard
  • Seat: Deluxe Suspension (Iso-Mount, Flip-Up)
  • Spindle Bearings: Maintenance-Free
  • Spindle Housing: 9" (22.9 cm) Diameter Cast Iron, 1" (2.5 cm) Heavy-Duty Spindle Shaft
  • Steering Controls: 1-5/8" (4.1 cm) Dia. Grips; Adjustable, Dampened
  • Weight: 2,650 lbs. (1,202 kg)
  • Warranty: 5 Year 2000 Hour Limited Warranty (No Hour Limit first 2 years)**
  • Width: Deck Clearance Width 102.3" (259.8 cm)
* The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.



Engine Manufacturer
Horse Power
37 hp
Engine Type


17.84 cu in. Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
Wheel Size
26 in. x 12 in. - 12 in. (66.0 x 30.5 x 30.5 cm)
Fuel Capacity
Diesel/12.5 gal. (45.4 L)


Deck Size
96 in. (243.8 cm)
Discharge Type


Related Products